Annual Technical Report 2008 on Industrial Design Information Activities submitted by Croatia (SCIT/ATR/ID/2008/HR)
Where URLs are requested below, it is preferred that either URLs which are likely to remain stable over time (three years or more) are provided, or home (main) page URLs are provided with a short explanation of how to access the corresponding information.
The expression "industrial designs" covers industrial designs and models. Offices which issue design patents should report their design patent information activities in this series of Annual Technical Reports.
I. Evolution of registration activities
Changes experienced in terms of application filings and grants (registrations) with respect to the previous year
- Number of industrial design applications (inc. multiple applications)
- Number of designs contained in industrial design applications
- Industrial designs in force (according to number of industrial design applications)
- Industrial designs in force (according to number of industrial designs contained in industrial design applications)
Changes_experienced_interms_of_application_filings_and_grants(registrations).doc
Trends or areas experiencing rapid changes with respect to the previous year
In the year 2008, the number of industrial designs applications filed by national route with the SIPO decreased by 23,3 % compared to the previous year.
In the year 2008, the number of designs contained in internationally filed applications increased by 19,6 % compared to the previous year.
URLs of web pages of the Office’s website that provide statistics related to industrial designs
Monthly official Gazette published on web pages of SIPO Croatia provide statistics:
http://www.dziv.hr/webcontent/file_library/izvori_inf/pdf/HGIV/Glasnici.asp
II. Matters concerning the generation, reproduction, and distribution of industrial design documents and of secondary sources of industrial design information, i.e., official gazettes
Publishing, including printing, copying techniques and electronic printing
Since the 2006 Official Gazette of the Office is published monthly on paper and is available in electronic form free of charge on Office's web site (http://www.dziv.hr).
Official Gazette contains the following information on industrial design: Applications Filed, Registration of Industrial design, Amendments and Changes in Industrial Design Register, Expiration of Industrial Designs, Assignment and Transfers of Rights, The Declaration of Invalidity of Industrial Design, The Renewal of Validity of Industrial Design Rights, Published Internationally Registered Industrial Designs with Effect in Republic of Croatia.
We offer a range of search options on our website including Date of Application, Locarno Class., Applicant/Holder Name, Applicant/Holder Country.
Main types of announcements of the Office in the field of industrial design information
Office announcements are published in Official Gazette of the Office(paper form and on-line), as well as on the Office’s web site.
Mass storage media and microforms used
The bibliographic data are stored in Ingres 2.6 database and industrial design images are stored in a LINUX network file directory.
The Office maintains a complete history of its industrial design files in paper form and all information for industrial design applied from 2000 up to date in electronic form.
Databases and office automation
All staff in the SIPO uses MS-Word 2000 for word processing that is operating in a Windows XP Professional environment.
Outgoing letters and SIPO’s gazette are fully automated and generated in MS Word.
The bibliographic data are stored in the SIPO’s database via the application “Industrial design's Register” (which is developed in INGRES OpenROAD application development tool). Industrial design images are stored on network discs (which are LINUX file directories).
Output documents and SIPO’s gazette are produced from automated MS Word templates.
Almost each outgoing letter is a MS Word template that consists of permanent text. Data that are changeable and depend on application/publication number are retrieved from the SIPO’s database via ODBC (Open DataBase Connectivity). An industrial design’s image is imported from the network disc.
All publishing data in SIPO's Gazette are formatted and followed by the INID codes according to the WIPO standard ST.60.
URLs of web pages of the Office’s website that provide access to online industrial design gazettes and to other sources of industrial design information, including download of bulk industrial design data
Current issue of the Office Gazette (joint Gazette including data on all types of industrial property) is available at:
http://www.dziv.hr/webcontent/file_library/izvori_inf/pdf/HGIV/Glasnici.asp
Free of charge searchable data base containing published information on designs applied for or registered is available at:
http://www.dziv.hr/DigitalLibrary/default.asp?izb=en
A range of search options is available, including Registration number, Date of Application, Holder Name, Indication of Product and Locarno Class.
III. Matters concerning classifying, reclassifying and indexing of industrial design information according to the classification systems applied
Classification and reclassification activities; Classification system used, e.g., International Classification for Industrial Designs (Locarno Classification), other classification (please indicate whether industrial designs are classified by your Office and, if so, which classification is used)
8th edition of the Locarno Classification is currently used for the classification of industrial designs. Designs are scanned and Locarno classification allocated.
Bibliographic data and processing
No ex officio search on novelty is carried out.
Free of charge public access to a database containing published information about registered industrial designs is available.
There is a possibility to file search request to the Office based on one (or more) of 4 criteria (name of holder, name of product, Locarno Class and Subclass, appearance of design). Such an information service is payable.
IV. Search file establishment and upkeep
All searches performed by examiners are completed using an automated search system.
File building
Design applications are made in paper forms that are available on our web site page. Cannot be filed electronically for the time being.
Applications are built into paper case files and kept in the office area until the procedure for registration is finished. Afterwards they are stored in the archive area in the same building.
Updating
The search files contain HR domestic designs updated daily, designations to the HR under the Hague system are updated monthly. All searches performed by examiners are completed using an automated search system.
Documentation from other offices maintained and/or considered part of the available search file
No documentation from other offices is maintained or considered part of any search file.
V. Activities in the field of computerized search systems for industrial designs
In-house systems (online/offline)
See under Administrative management.
External databases
No external databases are searched.
Administrative management systems (e.g., register, legal status, statistics and administrative support)
Applications that have been used in SIPO are developed in INGRES OpenROAD. SIPO uses an INGRES database. An application “Industrial design’s Register” is used for filing all bibliographic data concerning the particular industrial design. All industrial design changes (change of ownership, change of name, address, licence, etc.) are recorded and are maintained by Industrial design Register user interface.
Since year 2000 SIPO has developed its own document management system in electronic form that is meeting office needs (all incoming and outgoing documents have been scanned in Adobe Acrobat).
International industrial design data in XML format are monthly loaded from the WIPO’s ftp site. After processing data are available through the application “HAGUE”. Those data are used for examination and publication purposes.
MS Word is used for automatic generation of output documents. MS Excel is used for (automatic) generation of specific reports that are used for annual SIPO’s report, WIPO statistics and for other purposes (improving industrial design processes).
Published industrial design data (applications/grants) can be searched at the SIPO’s internet site http://www.dziv.hr/digitallibrary through the SIPO's web-server application (MS Windows 2003 server and mySQL database).
Equipment used (hardware, including the types of terminal and network used, and software), data carriers used
- 10Mbit/s leased line used for Internet connection, CISCO Network Equipment (LAN based on Fast Ethernet - 1000/100/10 Mbit/s).
- MICROSOFT environment:
- Servers: PC/WIN Server 2003 St. Ed. ; Fujitsu Siemens-Primergy RX 300/ Win SERVER 2003 St. Ed.
- Workstations: PC Pentium IV with WIN XP PROF. or WIN 2000 PROF.
- MS Exchange 2003 Server Enterprise, ISA 2004 (proxy.
- Linux (SUSE Distribution - Enterprise Server 8) - two cluster application: database and file sharing. Two servers nodes (type of cluster is fail over) on Fujitsu Siemens-Primergy RX 600 Servers. The cluster software is FujitsuSiemens Primecluster ver. 4.1 A30 for Linux.
- SAN (storage area network) connected with fiber channel switches to server nodes and backup device. SAN is consists of two FiberCAT CX500 (EMC) devices. Each of them has two-service processor and 10 disks in RAID-5 system (9 x 146 Gb FC disks + 1 x 146 Gb FC hotspare disk).
- Backup software is Backbone NetVault 7.1. Backup device is a MTC – 9084-221 FC (tape library) with two LTO 2 tape drives and 21 slot tape robot connected to fiber channel switch. Also the library offers a mail slot for exchanging offsite/onsite tapes. Total capacity installed on MTC library is 4 Tb of uncompressed data.
VI. Administration of industrial design information products and services available to the public (relating to facilities, e.g., for lodging applications, registering designs, assisting clients with search procedures, obtaining official publications and registry extracts)
Planning, administration, automation, security
SIPO Croatia offers free information services on legal matters, registration procedures, status of registered designs (national as well as international).The inquires can be made by phone, at the SIPO premises or by e-mail( infor@dziv.hr). Registry extracts are available upon request and payable. Copies of the file contents are available upon written request and payable. Commercial industrial design search services (upon charge) by SIPO specialist are also available upon order.
Collection management, preservation
The industrial design search collection is managed in electronic form. Data are refreshed at the end of the month (the publication date). A structured backup regime is in place to ensure preservation of the information.
Information services available to the public (including computerized services and search files contained in libraries remote from your Office and industrial design information posted by your Office on the World Wide Web)
Industrial design information services for the public are provided through the Office's Intellectual Property Information Centre (INCENTIV as Patlib centre) providing (among others) information concerning design applications filing, telephone queries, procedure information etc. ,and the public reading room where free of charge search of non-commercial design information is available). Information can be requested also by e-mail (info@dziv.hr) . Commercial design search services (upon charge) by Office specialist are also available upon order.
The SIPO library is runing by IP Information Centre-INCENTIV. The collections contain over 720 books, 62 Croatian and foreign periodicals available to the readers, all specialized in IP. The library is open to the public Monday to Friday from 8.00 am to 4.00 pm, except Thursday 10.00 am to 6.00 pm.
URLs of web pages of the Office's website for electronic filing of industrial design applications
Not applicable, no electronic filing of industrial design applications.
URLs of web pages of the Office’s website that provide information on business procedures such as: filing, publication, examination and registration procedures related to industrial designs; opposition and appeal procedures related to industrial designs; etc.
http://www.dziv.hr/en/default.aspx?pArtID=53&selection=1 (in English)
http://www.dziv.hr/default.aspx?pArtID=146&selection=1 (in Croatian)
URLs of web pages of the Office’s website that provide a description of information products and services offered by the Office (e.g., industrial design search service(s) and industrial design databases), as well as information on how to access and utilize them
http://www.dziv.hr/en/webcontent/file_library/inf_services/pdf/Letak_dizajn_EN.pdf
Navigation:
Homepage: http://www.dziv.hr
Information on Commercial Search Services:
http://www.dziv.hr/en/default.aspx?pArtID=94&selection=2
Searchable free of charge Database:
http://www.dziv.hr/DigitalLibrary/default.asp?izb=en
General information in industrial design and related services:
INCENTIV – Intellectual Property Information Centre
Phone: +385 1 610 98 25; fax: +385 1 611 20 17; e-mail: info@dziv.hr
http://www.dziv.hr/webcontent/file_library/inf_usluge/Incentiv.htm
VII. Matters concerning mutual exchange of industrial design documentation and information
International or regional cooperation in the exchange of industrial design information, e.g., in the form of official gazettes
There is no formal exchange of industrial design information.
Exchange of machine-readable information, e.g., data contained on CD-ROM or magnetic tape
Not applicable.
VIII. Matters concerning education and training, including technical assistance to developing countries (please indicate URLs of web pages of the Office’s website wherever appropriate)
Promotional activities (seminars, exhibitions, visits, advertising, etc.)
SIPO Croatia participated in specialized fairs organized in Croatia:
Participation in public events
12th University of Zagreb Fair, 3rd to 5th April 2008
PALEXPO 2008 – International Information Centre in the framework of International 36th Exhibition of Innovations, Geneva, 2nd to 6th April 2008
MSNTP 2008 – International Fair of New Technologies and Products, Rijeka, 16th to 18th April 2008
AGRO-ARCA 2008 – 1st Exhibition of Innovations, New Ideas, Products and Technologies in Agriculture and Food Industry, Slatina, 18th to 20th April 2008
MOS 2008 – International Crafts Fair within the Spring Zagreb Trade Fair, 22nd to 26th April 2008
PATLIB 2008 - International Conference for Patent Information Users, Warsaw, Poland, 28th to 30th May 2008
ARCA 2008 – 6th International Exhibition of Innovations, New Ideas, Products and Technologies within the Autumn Zagreb Trade Fair, 16th to 21st September 2008
SASO 2008 – 13th International Trade Fair, Split, 22nd to 26th October 2008
INOVA 2008 – 43rd Exhibition of Innovations, Čakovec, 6th to 9th November 2008
Training courses for national and foreign participants
In 2008, the Office continued to carry out its promotional and educational activities, introducing several important changes. A significant step forward in the systematic development of its educational activities was made by the establishment of the Training and Development of Use of Intellectual Property Section, following the re-organization of the Office that took place in March 2008.
After the completion of intensive education of employees within several CARDS projects, the Sector organized permanent education of employees within several internal seminars, inter alia:
Basic Course for Information Experts in the Field of Intellectual Property (INCENTIV), SIPO, Zagreb, February 2008
and develops public educational programs in the field of intellectual property in cooperation with its partners:
One-day Seminar „Intellectual Property Rights“, introductory course on intellectual property rights for the members of the institutions participating in BIZimpact project – MELE, CASB, CCE, CCTC, CEA, Agency for Protection of Market Competition, State Inspectorate, Customs Administration, MELE, Zagreb, February 2008
Lecture „Introduction to Intellectual Property“ for students of the Medical School of the University of Zagreb, February 2008, and students of the Faculty of Architecture of the University of Zagreb, Study of Design, Zagreb, May 2008
Lecture „Protection of Intellectual Property and Use of Industrial Property Data for Business Purposes“ for students of the – Vern’ Polytechnic, Zagreb, April 2008
A two-week International Summer School on Intellectual Property intended for young professionals and students was successfully organized in cooperation with the World Intellectual Property Organization and the University of Dubrovnik, for the first time, in Croatia.
IX.Other general information related to the Office that is available on the Internet -- URLs of web pages of the Office’s website that:
provide information on legislation related to industrial designs
http://www.dziv.hr/en/default.aspx?pArtID=58&selection=5
Office’s web-site: http://www.dziv.hr/
contain the Annual Report of the Office
http://www.dziv.hr/webcontent/file_library/izvori_inf/
contain industrial design-related news regarding the Office
News are available at the Office web site on the “news page” http://www.dziv.hr/